Complete solar power systems paired with the farm infrastructure around them. Solar pumps, rooftop and ground plants, cold storage, pack-houses, pump houses and fencing. Cut your energy bill to near zero and claim your PM-KUSUM subsidy.
Reliable power is the single most expensive hidden cost on most farms. Our Solar Power & Farm Infrastructure service designs and deploys complete solar systems, pumps, rooftop plants, ground-mount arrays, and agri-voltaic structures, then builds the supporting infrastructure around them: cold storage, pack-houses, pump houses, fencing, and electrical distribution. Every solar deployment is eligible for PM-KUSUM or state subsidies, which we secure end-to-end. (For polyhouse, greenhouse, fan-pad, shade-net, tunnel, or hydroponic installations, see our dedicated Polyhouse & Hydroponics service.)
Off-grid solar pump systems (1 HP to 25 HP). AC/DC submersible or surface, with smart controllers for scheduled and soil-moisture-triggered operation. PM-KUSUM Component B/C eligible with up to 60-90% subsidy.
Rooftop and ground-mounted solar systems (5 kW to 500 kW+) powering cold storage, processing units, pack-houses, farm-stay buildings, and residential loads. Net-metered grid-tied or hybrid with battery backup.
Powering fans, foggers, grow lights, climate controllers, electric fencing, drying yards, and IoT sensors, all from dedicated solar micro-grids sized precisely to your load profile.
Elevated solar panels over shade-loving crops, grow turmeric, ginger, or leafy greens underneath while generating power above. Same land, two revenue streams, PM-KUSUM Component A eligible.
Modular PUF-panel cold rooms with temperature/humidity control; workflow-optimized grading and packing sheds for post-harvest efficiency.
Rugged pump enclosures, solar-powered electric perimeter fencing, farm roads, drainage, and electrical distribution, all engineered to IS codes.
End-to-end paperwork for PM-KUSUM (solar), NHB, MIDH, and state subsidies, typically 30-90% of capex covered. We handle application, sanction, and disbursement.
Energy audit of every farm load (pumps, cold rooms, lights, fans), structural assessment for roof/ground mounting, and shade analysis.
Panel sizing (kWp), inverter selection, battery/grid-tie configuration, and pump hydraulics all calculated. Component A/B/C PM-KUSUM pathway chosen.
Cold-room capacity, pump-house, fencing, and electrical distribution planned in parallel with the solar design. All structural designs per IS codes.
DPR preparation and submission to PM-KUSUM, NHB, MIDH, or state solar agencies BEFORE construction begins, no retrospective claims.
Excavation, footings, anchor bolts, pump-house construction, cable trenches, and structural base completion.
Panel erection (rooftop / ground-mount / agri-voltaic racks), inverter and pump installation, grid-synchronization, and performance validation.
PUF cold-room panel installation, refrigeration commissioning, pack-house electrical, and fencing, all connected to the solar plant.
Training, documentation, subsidy-disbursement support, and an annual maintenance contract covering panel cleaning, pump servicing, and cold-room refrigeration.
Solar power and farm infrastructure are engineered, not bought off-the-shelf. Pump sizing must match the well's hydraulic load; panel kWp must match the consumption pattern; subsidy pathway must match your land status. Below is the actual sizing math and policy framework we run on every project.
A solar pump is not specified by HP alone. It is specified by the water-energy product the well needs to deliver each day. Get this wrong and either the pump can't lift to the tank, or you over-paid for HP you never use.
| Pump duty | Typical Q × H | Solar kWp required | PM-KUSUM Comp B subsidy |
|---|---|---|---|
| 3 HP submersible | 6 m³/h × 30 m | 3.0 kWp | ~₹1.2 lakh net cost (60% off) |
| 5 HP submersible | 9 m³/h × 40 m | 4.8 kWp | ~₹1.7 lakh net cost |
| 7.5 HP submersible | 12 m³/h × 50 m | 7.5 kWp | ~₹2.4 lakh net cost |
| 10 HP submersible | 15 m³/h × 60 m | 10 kWp | ~₹3.2 lakh net cost |
The PM-KUSUM scheme has three distinct components. Picking the wrong one wastes the subsidy entirely. We map your land + load to the right pathway on day 1:
| Component | What it covers | Subsidy split | Best for |
|---|---|---|---|
| A: Decentralized solar plant | 500 kW to 2 MW grid-connected solar on barren / cultivable land | Land lease + REC purchase by DISCOM | Landowners with 4-10 acres of underutilized land near substation |
| B: Standalone solar pumps | 7.5 HP and smaller off-grid solar pumps | 30% central + 30% state + 40% farmer (or 50% loan) | Farms without grid or with unreliable grid |
| C: Grid-connected pumps (Individual Pump Solarization, IPS) | Existing grid-connected pumps converted to solar | 30% central + 30% state + 40% farmer (sell surplus to DISCOM) | Farms with existing grid pumps and net-metering availability |
For cold-storage / pack-house / farmstay buildings, we size the solar plant to the daytime load profile, then layer batteries for night operation if needed.
The payback equation answers the only question that matters: how many years until cumulative savings beat the post-subsidy capex?
Engineering-grade tools and scientifically validated methods underpin every deliverable.
This service delivers maximum ROI for the following profiles:
Book a consultation with our agronomy team. We'll assess your farm and design a tailored plan, no obligation.
Book Farm Analysis